Emergency Flood Kit 1


England/Wales: £30.00
Scotland: £42.00
Highlands: £54.00

All prices include VAT

More info

Emergency Flood Kit 1

A Emergency Flood Kit is an emergency pumping kit which has a powerful pump, a pack of FloodSax and discharge hoses for defending a property from flooding.

Depending on which kit is selected, the pump is designed to pump water levels down to a level of between 3mm and 1mm. Hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency.

Supplied in a sturdy easy-carry case, there is sufficient space within to not only store the pumping equipment, but keep other flood protection products e.g. emergency grab bags, emergency meals etc.


  • 1x pump: BPS100
  • 1x Phase 1 hose kit: 10 metres of 25mm (1”) non-kink hose c/w quick release connectors
  • For pumping near the property e.g. over window ledges, steps, walls, FloodSax, sandbags etc
  • 1x Phase 2 hose kit: 10 metres of 25mm (1”) lay-flat hose c/w quick release connectors
  • For pumping over flat surfaces e.g. over ground, away from the property
  • 2x Floodsax Door: 2x door strip FloodSax and 8x FloodSax Regular
  • 1x Easy carry case: including 1x lid and 2x fastening straps with ABS clips

Features of the Kit

  • 1x BPS100, 230 volt submersible pump. This has a 100W motor, weighs 2.5kgs (dry) and is supplied with a quick release hose connector, 10 metres of power cable and a plug for immediate use
  • It will pump approximately 40 litres per minute across 30 metres of level ground when using 25mm (1”) hose
  • No initial priming required before starting, it will pump water down to 3mm, but it must not run dry
  • For the full specification of this pump see page 2. Ideal for use with a generator or mains power (when connected and safe to use)

Measurements of the kit

Size 600 x 400 x 400mm
Weight 10.6kg

Extra Hoses

  • Optional extra hoses are available for the Emergency Flood Kit
  • The Phase 1 Hose is suitable for pumping over windows ledges, steps, walls, sandbags etc.
  • The Phase 2 Hose is ideal for pumping over flat surfaces e.g over ground
  • Please use the drop-down menu to choose extra hoses
Phase 1 Hose
Phase 2 Hose

The BPS-100 Pump

The BPS series, in thermoplastic, are designed for clean and slightly dirty water. The top discharge design makes them suitable for partial immersion applications and where space or access is restricted. BPS-100 has 304 stainless steel shafts. The model is fitted with a carbon/ceramic mechanical seal, in an intermediate oil chamber, with an inner lip seal. This construction offers good wear resistance and protection in the event of short periods of dry running. IT is fitted with residue strainers which enables the pumping of water down to 3mm.

Supplied with 10 metres of heavy duty rubber power cable.

Full Specification of the BPS-100

Manual or Auto Manual
Outlet 19 & 25mm
kW 0.1
Flow (l/min) 70
Voltage 230V
Head 6m
Free Passage 3mm
W x L x H 134 x 155 x 250mm
Dry Weight 2.5kg
Packing Weight 3.5kg


Write a review

Emergency Flood Kit 1

Emergency Flood Kit 1

Basket 0 Product Products (empty)    

No products

£0.00 Delivery
£0.00 Total

Check out

Product successfully added to your basket


There are 0 items in your basket. There is 1 item in your basket.

Total products
Total shipping  £0.00
VAT £0.00
Continue shopping Proceed to checkout


Why not keep up to date with news and great over over at our Facebook page.



We can delivery any of our products direct to your door. Anywhere in the U.K. or Europe.


Call our help line specialists on

01777 279 180