Emergency Flood Kit 4

Emergency Flood Kit 4

A Emergency Flood Kit is an emergency pumping kit which has a powerful pump, a pack of FloodSax and discharge hoses for defending a property from flooding.

Depending on which kit is selected, the pump is designed to pump water levels down to a level of between 3mm and 1mm. Hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency.

Supplied in a sturdy easy-carry case, there is sufficient space within to not only store the pumping equipment, but keep other flood protection products e.g. emergency grab bags, emergency meals etc.

Contents

• 1x pump: Tsurumi TEM-25H
• 1x Phase 1 hose kit: 10 metres of 25mm (1”) non-kink hose c/w quick release connectors
• For pumping near the property e.g. over window ledges, steps, walls, FloodSax, sandbags etc
• 1x Phase 2 hose kit: 10 metres of 25mm (1”) lay-flat hose c/w quick release connectors
• For pumping over flat surfaces e.g. over ground, away from the property
• 2x Floodsax Door: 2x door strip FloodSax and 8x FloodSax Regular
• 1x Easy carry case: including 1x lid and 2x fastening straps with ABS clips

Features of the Kit

• 1x Tsurumi TEM-25H driven pump, with a 1.5HP engine and weighs 6kgs (dry). This is supplied with a quick release discharge connector, a 4 metre, quick release suction hose, and a low level suction tool.
• It will pump approximately 80 litres per minute across 30 metres of level ground when using 25mm (1”) hose. Initial priming of the pump with water is required before starting, It will pump water down to 3mm, but it must not run dry
• Ideal for use when mains power is not available

Measurements of the kit

Extra Hoses

• Optional extra hoses are available for the Emergency Flood Kit
• The Phase 1 Hose is suitable for pumping over windows ledges, steps, walls, sandbags etc.
• The Phase 2 Hose is ideal for pumping over flat surfaces e.g over ground
• Please use the drop-down menu to choose extra hoses

The Tsurumi TEM-25H Pump

The TEM-25H is a self-priming centrifugal pump, powered by a compact and powerful 4 stroke, genuine Honda petrol engine. This is coupled to a pump end that has an aluminium body, volute and impeller, which ensure that is light, compact and portable.

It is fitted to a sturdy base plate, with rubber feet to minimize vibration and has a comfortable yet robust carrying handle. For reliability the pump is fitted with a carbon ceramic mechanical seal.

Suitable for clean and dirty water, it has high head capabilities and gives a good flow of water. It`s neat size and performance makes it popular for irrigation, sprinkling, flooded pit drainage, washing down and general pumping. It is not fitted with an engine oil alert system.

Maximum suction lift is 8 metres, however 6 metres or less is recommended. house couplings, washers, clips and strainers are supplied, but hoses are extra.

Full Specification of the TEM-25H